“He has golden hands” - this is what they say about masters who, from improvised materials, are able to collect the miracle of modern technology. Despite the abundance of inexpensive finished equipment in stores, self-taught craftsmen successfully design and create household appliances, units for the garden plot and very effective devices for the workshop.
It turns out that you can also assemble a vacuum cleaner with your own hands. The main thing is to understand the design, find the necessary details and allocate some free time. We offer three interesting models for independent experiments.
Construction vacuum cleaner from an old household
If you constantly deal with technology, the design features and operating principles become clear.
And if necessary, you will no longer be spending money on a branded construction vacuum cleaner, and in a couple of evenings you will make a device that is not inferior in characteristics to the untwisted “cleaner”.
For comparison, the popular KARCHER MV3P among consumers with a 17-liter tank and a power consumption of 1000 watts costs about 7 thousand rubles. If you do not buy spare parts for homemade work, but take old parts, the vacuum cleaner will turn out to be almost free
So did the author of a construction model, working on the basis of a failed Whirlwind vacuum cleaner. We offer you to get acquainted with the manufacturing process of a construction vacuum cleaner.
In the manufacture of homemade, you should take into account the features of the room and some of the nuances of the selection and fastening of individual structural elements. The following are helpful tips for vacuum cleaner assembly.
Image Gallery
Photo from
Household vacuum cleaner with a homemade filter
Vacuum cleaner with homemade aquafilter
A good filter for homemade
Plastic bucket cyclone filter
Big wheels at the vacuum cleaner
What will be needed for alteration?
Literally all the products involved in the modernization have already been used, therefore, do not require acquisition costs. If some details were not found at hand, they can be bought for a penny on the online sales site or found in a landfill.
True, it is recommended that you nevertheless use a new filter - for the high-quality operation of the vacuum cleaner, as well as buy some little things: a socket, parts for an electric board, wires, fasteners.
The total cost of purchasing new parts amounted to 800 rubles., And the socket turned out to be the most expensive element - 350 rubles. Parts for the board cost 250 rubles., Filter - 200 rubles.
Image Gallery
Photo from
Old vacuum cleaner in assembled condition
Storage tank from a metal barrel
Schematic diagram of a vacuum cleaner with a switch
Car air filter
In addition to the listed parts, you will need a socket, a piece of rubber car mat for laying, a tool for work:
- drill with a set of crowns and drills;
- screwdriver;
- jigsaw;
- pencil with a ruler, compass.
As fasteners there will be not only self-tapping screws, but also bolts, therefore, to tighten the nuts, wrenches of the right size will be required. To connect individual elements - a switch, an electronic board and a network cable - you must draw a diagram in advance.
Wiring diagram. The switch is installed in two positions: the first just turns on the vacuum cleaner, the second provides the synchronous inclusion of a building power tool with a vacuum cleaner
In order for the improvement of the old appliance to please a successful result, you need to know how the vacuum cleaner works. So the home master will understand what and for what purpose he is modernizing.
Step-by-step manufacturing instructions
When all the details of the future unit and tools are prepared, you can proceed with the assembly. But first you need to comply with safety standards - wear protective clothing, work gloves.
Operating procedure:
- Step 1 - Installing an Outlet. We drill a hole in the upper part of the cover with a 42 mm diameter crown. Between the outlet and the body we put a rubber gasket cut out of the car mat. For fastening we use self-tapping screws.
- Step 2 - wiring diagram. On the cover, we drill small holes for the toggle switch and for attaching the circuit. The board should not touch the case, so we install it on racks cut from a fountain pen.
- Step 3 - Attaching the Toggle Switch. As a result, a switch and an outlet for a power tool should be installed on the outside of the cover, and an electronic board on the inside.
- Step 4 - Attaching the Power Cable. It is better to solder the cable, with two wires to the switch, and the third grounding goes to the large mounting screw, to which the ground is already connected from the outlet. This is necessary to ground the device.
- Step 5 - fixing the filter. Cut 95 mm holes in the bottom of the dust collector and in the tank lid, drill holes for the screws around the circumference, cut a plug out of plywood, tighten all the parts with screws. We fix the filter with a hairpin on the bar.
- Step 6 - Install the Suction Pipe. We drill a hole in the top of the tank with a 57 mm crown. We insert into it a preassembled pipe with a flange, which can be constructed from a piece of sewer pipe.
- Step 7 - vacuum cleaner assembly. We install a garbage collection tank, close it with a lid so that the filter is inside. Then we attach a part of the old vacuum cleaner with the engine, tighten it with a metal clamp.
- Step 8 - connecting the hose. Instead of a hose, you can use a plumbing corrugated pipe. We insert it into the connecting pipe, then turn on the unit. Testing can be done by removing sand or sawdust.
During testing, attention must be paid to the suction power and the tightness of the waste bin. If the parts will not adjoin each other loosely, the power of the unit will noticeably decrease.
Cleaning result: all sawdust from the floor successfully moved inside the tank. The floor is absolutely clean, and the volume of the waste bin is enough to clean the workshop more than once
But it is necessary to make one more test - with a power tool.
We insert the plug of the jigsaw or circular saw into a socket on the case, turn on the tool. Together with him, the vacuum cleaner should automatically work.
Workshop cyclone vacuum cleaner
Another version of a construction vacuum cleaner, but with a complicated design. This replacement for a purchased industrial model is made from an old vacuum cleaner, a plastic container and a cyclone filter.
The peculiarity lies inside the structure - it is a metal casing for protecting the filter.
For ease of use, a home-made model is installed on a cart, also assembled by yourself. Thanks to this modification, the vacuum cleaner can be easily moved around the workshop or in the yard - for garbage collection in the house area
The cost of homemade is determined by the costs of individual parts. An old but functioning household vacuum cleaner was found in the pantry, a plastic tank was purchased for 500 rubles, and a filter for the Gazelle car was 180 rubles. It’s easy to calculate the total cost.
You will learn about how to make a cyclone for a vacuum cleaner from our article. It details the assembly process.
Build Order:
Image Gallery
Photo from
In addition to the parts listed, assembly assembly will require marking, fastening and cutting tools, which are always in the arsenal of home craftsmen
We drill a small hole in the lid. From the sheet of tin we cut out the petals, fix them together with the fixing pin on the lid. Put on a filter on top, fasten
We install a tank and a vacuum cleaner nearby. We insert the suction hose from the vacuum cleaner into the tank opening, fix it. An already fixed filter is located on the back of the lid.
The pipe for attaching the main suction hose is made from a piece of sewer pipe. We insert it into the barrel opening and fix it with a slight tilt inward. As a fixture - a collar
We cut out a piece of tin, and then cut out the blank to protect the filter. We twist it so that the filter element is inside and is protected from debris flying from the hose
It turned out that the plastic barrel is deformed by a powerful stream of debris. To make it tougher, cut a hoop from a steel strip of 25 mm, fasten it to the case with bolts with large washers
From a sheet of thick plywood, we cut out a small piece of such a size so that all the elements of the vacuum cleaner can be placed on it. At the corners we fasten four swivel castors from the old device
We install on the cart already connected vacuum cleaner and a plastic tank. We attach the main suction hose for garbage collection to the tank. Homemade household vacuum cleaner is ready
Step 1 - preparing parts and tools
Step 2 - Stud for attaching the filter to the cover
Step 3 - connecting the hose to the tank
Step 4 - Installing the Suction Hose
Step 5 - Filter Guard
Step 6 - Shell for stiffening
Step 7 - Plywood Sheet Trolley
Step 8 - general assembly of the building model
To test the functioning of the home-made unit, it remains to connect to the power supply. The suction power of the unit should be the same as that of an old vacuum cleaner, if the engine has retained its working qualities.
If you don’t have an old vacuum cleaner, you can buy a used model by announcement - online shopping portals offer many options. Most likely, an outdated device will cost no more than 1 thousand rubles.
The following article will familiarize you with the rating of industrial cyclone vacuum cleaners, which should be read by both home craftsmen and future buyers.
Do-it-yourself portable cleaner
As an experiment, you can collect a miniature vacuum cleaner, which is useful for cleaning crumbs, dust or debris from a table, shelves, window sills.
Tools and materials necessary for the work: a construction knife, a manual jigsaw, a glue gun, hot melt adhesive, a marker, a compass.
Image Gallery
Photo from
For assembly, you will need a plastic bottle, plastic jars with caps, three syringes, a small electric motor, a DVD disc, a plastic tube
You will also need two parts of a plastic bottle: the upper part with a cap and a piece cut from the middle
Two jars with lids also need to be prepared - with a jigsaw, cut off the upper parts with thread
In one syringe, we cut off the excess parts from both ends, in the second - only from one
For most of the bottle (with cork), glue the thread from the jar and the oblique nozzle from the syringe
Glue the thread from the second jar to the second, small fragment of the bottle, on the other hand - the lid is threaded in the opposite direction. We make a hole in this cover and glue a syringe to it
On the cover located on the other side of the case, install the engine. To do this, drill the mounting holes and sit it on the small screws
We divide the DVD into 2 parts, from a transparent we design an impeller with blades. We fix the blades with hot-melt adhesive. In the future, it can be painted with acrylic paint.
Step 1 - preparing the parts
Step 2 - cut the bottle into pieces
Step 3 - cut off the tops of the cans
Step 4 - syringe nozzles
Step 5 - assembly of the cyclone part of the vacuum cleaner
Step 6 - compressor housing
Step 7 - Mounting the engine on the cover
Step 8 - Impeller
When making all components, it is necessary to adjust the parts to size so that there are no gaps after gluing - for good suction, tightness is required.
To mount the fan, you need to cut off a piece of the syringe with the central location of the needle and stick it in the center of the side opposite to the one where the blades are installed.
Image Gallery
Photo from
Step 9 - mounting the impeller
Step 10 - holes in the compressor
Step 11 - a dust can from a large jar
Step 12 - Assembly Design
To check the operation of the device, pour crumbs, pieces of paper, groats on the table. When you turn on the hose begins to suck in the garbage that gets into the lower bank - a dust collector.
To clean it, you need to disconnect the cyclone part - in fact, unscrew the bottle from the cork, and then just remove the lid.
Another option for a mini vacuum cleaner:
Features of the assembly and operation of homemade products:
An excellent replacement for the brand model of plastic buckets and plumbing pipes:
As you can see, it’s not so difficult to make a powerful building block or a mini-vacuum cleaner yourself. The main thing is to be patient, study all the stages of manufacturing and find some free time for a home experiment. And devices, as practice has proven, fully cope with their functions.
Please write comments in the block below. Ask questions on obscure and controversial issues, publish photos on the topic of the article. Tell us about how to assemble or upgrade a vacuum cleaner with your own hands, it is possible that your tips will be useful to visitors to the site.